- Comments (0)
- Request for Quote
LC/APC-LC/APC | Single Mode G657.A2 UNI20 Push-Pull Uniboot Patch Cord | 2.0mmFeatures
This LC uniboot fiber patch cord has UNI20 series single mode LC Duplex APC connectors, with push-pull mechanism, on each side. It replaces the classic Fig-8 design with a 2mm special round Duplex cable. Thanks to the Push-Pull Boot mechanism, it is very easy to use this patch cord in the busiest panel areas. The polarities of these connectors can be easily reversed by pulling back the outer housing.
The outer housing is fixed on the connector by a locking mechanism located at the bottom. By pressing the locking lid downwards, the lock is released and the housing can be pulled off. After that, reversing the polarity can be done easily by switching the positions of the connectors and pushing them back into the outer housing frame.
Push-Pull Connector Features
- Easy to disassemble and assemble even in the most difficult areas thanks to the Push-Pull Boot mechanism
- A single 2mm cable is used instead of the classic Fig-8 design
- Cables take up less space than conventional methods, in high-capacity panel applications
- Following the instructions, polarity change is very easy and safe
- These connectors are suitable for use with 1.2-2.5 mm round and duplex cable designs
- IEC61754-20 and GR-326-Core compliant
- RoHS/REACH&UL94-V0 inflammability compliant