MTS-2000 + Quad Module Single Mode + Multi Mode OTDR

Product Code MTVC159
Lead Time 30 work days
Brand VIAVI
Request for Quote
Campaign
  • Features
  • Documents
  • Comments (0)
  • Request for Quote
  • MTS-2000 + Quad Module Single Mode + Multi Mode OTDR

    Features

    The VIAVI 4146 QUAD Sinlge-Mode and Multi-Mode OTDR module an ideal companion for the installation and maintenance of LAN/WAN and multimode Access networks thanks to its fast acquisition time, sharp resolution (0.8m event dead zone) and 26/24dB dynamic range at 850nm and 1300nm. VIAVI MTS-2000 is a portable modular OTDR fiber optic test device. MTS-2000-QUAD combine singlemode and multimode testing capabilities (850/1300nm multimode and 1310/1550nm singlemode wavelengths) within a single module, making this kit the right tool to address the testing needs of Premises/Entreprise networks as well as wireless backhaul infrastructures.

    VIAVI MTS-2000 OTDR Test Device

    The VIAVI MTS-2000 is a small hand-held modular test device with a hands-free bag, used for fiber optic networks in Entreprise, Metro, FTTx, Access and point-to-point or point-to-multipoint networks (PONs).
    Test capabilities include a range of OTDR modules for multimode and single-mode testing, as well as a range of FiberCompleteTM modules for automated Insertion Loss/Optical Return Loss (IL/ORL), and fault finding. Both OTDR and FiberComplete modules are passive optical network (PON) optimized. The unit is also ready for connector end face pass/fail analysis to IEC standards with a digital analysis microscope. The PON power meter and CWDM-OSA modules also enable turn-up and troubleshooting of PON and coarse wavelength division multiplexing (CWDM) networks.

    VIAVI MTS-2000 Applications

    • Certify the fiber physical layer on FTTx/PON, access, metro and enterprise networks
    • Ensure the highest-quality connectorizing, splicing, and turn-up of new fiber links
    • Improve workflow with hands-free solution, driving best practices to IEC standards
    • Smarter and faster field testing with simple setup and instantaneous pass/fail results
    • Boost productivity with improved report generation and flexible connectivity
    • Decrease OpEx and increase field productivity when combined with StrataSync™, cloud-enabled software that displays assets, modules, versions, and locations; maintains accurate instrument configuration and setup; and, provides visibility into instrument utilization and test-data management

    VIAVI MTS-2000 Features

    • Large 5-inch touch-screen display
    • Field-installable modules
    • Wide range of OTDR modules including Quad and PON
    • FiberComplete automated IL/ORL, PON power meter, and CWDM analyzer
    • Automated fiber inspection and IEC pass/fail analysis
    • Optional built-in optical power meter, visual fault locator (VFL), and optical talk set
    • New-generation lithium polymer (LiPo) battery for 8-hour operation
    • Flexible connectivity with Ethernet, USB, Bluetooth, and WiFi capabilities
    • Special hands-free bag standard
    • Cross-compatible with T-BERD/MTS-4000

    Wide Range of Applications for Maximum Flexibility

    The VIAVI T-BERD/MTS-2000 provides the largest range of test capabilities offered in one handheld unit. The modular design allows service providers the maximum flexibility to scale their investment and evolve with the growth of their network.

    The VIAVI MTS-2000 instrument supports the whole range of essential fiber analysis tools including connection inspection, connection check, source, ORL, OTDR, a power meter, a PON selective power meter, and CWDM optical spectrum analyzer.

    Application modules used with the VIAVI T-BERD/MTS-2000 can also be used with the T-BERD/MTS-4000 and the two products are interoperable.

    Boosted Productivity with Wifi, Bluetooth and Ethernet

    The VIAVI T-BERD/MTS-2000 integrates various communication capabilities allowing remote control, data and setup uploads/downloads, and report transfer. The unit has one high-speed 1G Ethernet port, three USB ports, and optional WiFi and Bluetooth network connections.

    VIAVI 4146 QUAD MM/SM Module

    The VIAVI 4146 Quad OTDR module combines singlemode and multimode testing capabilities (850/1300nm multimode and 1310/1550nm singlemode wavelengths) within a single module, making it the right tool to address the testing needs of Premises/Entreprise networks as well as wireless backhaul infrastructures. With 37/35dB dynamic range for singlemode wavelengths, the VIAVI 4146 QUAD OTDR module can also be used in Metro and Access/FTTx networks. Therefore, the Quad OTDR is the ideal module for installers/contractors and any users dealing with both singlemode and multimode applications in their daily work.
    Combining a true loss test set (light source and power meter) with the VIAVI 4146 QUAD module on the same port enables users to perform a full range of fiber certification tests (continuity check, total link loss, length, connectors reflectance, and events loss measurements) without disconnecting fibers. This capability is integrated in both singlemode and multimode optical ports.

    VIAVI 4146 QUAD Module Benefits

    • Offer ideal test solution for use in the installation, turn-up and maintenance of LAN/WAN, Access, Metro and Wireless Backhaul networks
    • Bring flexibility with quad-wavelength Singlemode/Multimode version (Quad) and dual-wavelength Multimode version (MM)
    • Enable to perform a full range of fiber certification tests with integrated Loss Test Set on both multimode and singlemode OTDR ports
    • Include bi-directional analysis, fault locator, macrobend detection and multi-pulse acquisition test features

    VIAVI 4146 QUAD Module Features

    • Dynamic range of 26/24dB (MM) and 37/35dB (SM)
    • Integrated singlemode and multimode CW Light source and Broadband Power Meter
    • TIA/IEC pass/fail thresholds
    • Propagation delay measure - ment in multimode (TIA-568-C)
    • Optimized for testing 10MB to 40GigE
    • Enables Tier 2 certification of Premises networks
    • For Tier 1 Fiber Certification, see the JDSU Certifier40G
    • IEC 61280-4-1 compliant using an external mode conditioner

    VIAVI MTS-2000 Front Details

    1. 5-inch touch screen
    2. Charge indicator
    3. On indicator
    4. File menu
    5. Setup menu
    6. Start/Stop
    7. Testing indicator
    8. On/Off
    9. Home page
    10. Cancel
    11. Direction and validation keys
    12. Results page
    13. Loudspeaker
    14. Headset jack
    15. AC/DC input
    16. Slave mini USB port
    17. RJ45 connector
    18. Master USB ports (2)
    19. Power meter port
    20. VFL or talk set port
    21. WiFi and Bluetooth options
    22. Stylus for touch screen
      Multimode Singlemode+Multimode Singlemode
    Type MM OTDR QUAD OTDR LM OTDR MA OTDR MP OTDR
    Wavelengths 850/1300 850/1300/1310/1550 1310/1550/1625/1650 1310/1550/1625/1650 1310/1490/1550/1625/1650 nm
    Dyn. range 27/25dB 27/25/37/35dB 34/32/32/30dB 37/35/35/33dB 42/40/40/40/40dB
    EDZ 0.8 m 08 m MM / 0.9 m SM 1 m 0.9 m 0.8 m
    ADZ 4 m 4 m 4 m 4 m 4 m
    Applications - MM networks (Datacom/IT/Private Enterprises) - MM networks
    - Short/Medium Range SM Distances
    - Short Distances
    - Test before or after the splitter or up to 1/16 splitter on PON Networks
    - Short/Medium Range Distances
    - Test through up to 1/32 splitter on PON Networks
    - Medium/Long  Range Distances
    - Test through up to 1/128 splitter on PON Networks

About Samm Teknoloji

Fiber Optic Cable Manufacturer

Being a Turkish fiber optic cable manufacturer and an efficient supplier for Europe, Asia and America, SAMM Teknoloji joined the global market with very high potential. SAMM designs and manufactures a wide variety of fiber optic cable types optimized for fixed or mobile networks that can be used in indoor and outdoor environments. SAMM offers reliable, cost-effective optical products to meet the needs of customers with innovative products developed and tested in accordance with international standards.

Fiber Optic Assemblies Producer

As a fiber optic cable assemblies producer and supplier in Turkey and an optical assemblies supplier for Europe and Asia, Samm Teknoloji has been providing high-quality and reliable fiber optic cable assemblies since 2006. Due to our fully equipped production facilities, laboratories and long-term expertise in fiber optics, we are able to produce a first class fiber optic assemblies portfolio that ensure the highest level reliability. Therefore, one of the main priority is the ongoing expansion and advancement of the manufacturing capabilities.

Data Center Solutions Producer

As a Turkish producer of future-ready fiber optic data center equipment, SAMM Teknoloji produces UHD ultra high density MTP/MPO panels and cassettes, modular panels and cabling raceways. SAMM Teknoloji has also kept pace with the accelerating spread of Cloud Computing, which has increased the need for mega Data Centers. SAMM provides Data Center solutions and products that suit all structures with high data storage density, data traffic and data security.

Secure shopping
Fast Shipping
Easy Refund
Installment Payment

About Us

Address

Gebze Organize Sanayi Bölgesi (GOSB) İhsandede Cd. 800. Sok No: 802, 41400 Gebze-Kocaeli, Türkiye

Phone

444 1 726

E-mail

For Domestic Inquiries from Turkey


For International Inquiries

Prepared by  T-Soft E-Commerce.